Welcome: SUNMOY TECHNOLOGY COMPANY LIMITED
英文版 Spanish French 中文版
Your location: Home > News > Technology News

Technology News

Backyard Well Drilling Completed in One Day: Simple Operation Guide for Home Drilling Rigs

Backyard Well Drilling Completed in One Day: Simple Operation Guide for Home Drilling Rigs

Step 1: Preparation (1 hour)

Equipment Check:

Drilling Rig (with engine or motor)

3-6 drill rods (1.5 meters each)

Drill Bit (flat-headed three-lobe type)

Well Casing (with filter)

Clean gravel (2-4 mm size)

Level, wrench, gloves, safety helmet

Location Selection:

At least 10 meters away from toilets and garbage dumps

Solid and firm ground

Leave sufficient space for equipment access

Step 2: Drilling (6-8 hours)

Machine Installation:

Stable placement of the drilling rig base

Spread out the four support legs

Level the machine with a level

Tighten all screws

Drilling Operation:

Installing the first drill rod and drill bit

Starting the machine and slowly lowering it into the hole

Keep the drill rod vertical

Drilling depth... 1.5 meters extension with a drill rod. Drill to the predetermined depth (recommended within 15 meters). Insert the casing and filler: Immediately insert the connected well casing. Pour clean gravel around the casing. Install the wellhead cover. Connect the water pump and pump until the water becomes clear. Step 3: Precautions. Safety First: Wear a safety helmet and gloves. Maintain distance while the machine is running. Do not operate the machine on uneven ground. Take a break and check every hour of work. Common Problems: Slow drilling: Increase the drilling pressure appropriately. Turbid water: Pump for a longer period. Machine vibration: Stop the machine and check for levelness. Step 4: Completion Inspection. Test water output: Pump continuously for 30 minutes. Observe water quality: Let it stand to see if it is clear. Clean and maintain the equipment before storing. Following this process, a beginner can complete a household well in one day. Key points: Start drilling straight, insert the casing promptly, and thoroughly clean the well. Contact the equipment supplier for technical support if you encounter difficulties.